|
|
Taped off and I batch of graphite-rich resin applied. I used approximately 40% by volume. There was already one application of plain resin on the hull after glassing the whole bottom.
First coat done, took about 3 full cups, which was 4 pumps of hardener and resin each and 4 heaping teaspoons of graphite. On the sides you can see where my cloth is showing, it wouldn't sand smooth and I hadn't intended to fair it.
Final coat done. As you can see, the lines from the cloth got to me and I faired around both sides. Knew I'd regret it if I didn't. I didn't fair the seams on the bottom, but no one is going to see them and they were fairly consistent anyway, they look like they belong.
